IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE
OR ELECTRIC SHOCK
Read all the instructions before using this product.
This device should be supervised when used
around children.
Do not put fingers into the electric vehicle or
charger connectors.
The Emporia EV Charger is intended for use with
electric vehicles only. Specifically, it is intended
only for electric vehicles not requiring ventilation
during charging.
The Emporia EV Charger is intended to be installed
in stationary, grid-tied power systems. Do not use
the Emporia EV Charger with back-up generators.
Do not use the Emporia EV Charger in any manner
other than specified in this installation guide.
Do not attempt to disassemble or repair any of the
components of the Emporia EV Charger. There are
no user serviceable parts inside.
Do not use this product if the flexible power cord or
charging cable is frayed, has broken insulation, or
any other signs of damage.
Do not use this product if the enclosure or the
connector gun is broken, cracked, open, or shows
any other indication of damage.
Do not install the Emporia EV Charger in
environments with explosive gas or vapors; nor
where temperatures are outside its operating range
of -22°F to 122°F (-30°C to 50°C).
Use 194°F (90°C) wire, 6 AWG copper when
installing a 48A connection in a hardwire
installation.
Safety information
SAVE THESE INSTRUCTIONS