Table of Contents
Advertisement
Step 8: Complete setup
Your Emporia EV Charger is now ready to
charge your vehicle. It is set from the
factory to charge at 40 Amps (NEMA
14-50) or 48 Amps (Hardwired). To raise or
lower the charge rate to match your breaker
size and installation type, as well as to take
advantage of the numerous other features
available from Emporia, return to the
Emporia App, choose Add a Device under
Manage Devices and follow the instructions
to set up your EV Charger. A PIN must be
set in the app when setting the breaker
size. Once your phone has connected to the
EV Charger via Bluetooth, you'll be
prompted to connect to a nearby Wi-Fi
router. Make sure you have your Wi-Fi
network name and password available.
Need help?
emporiaenergy.com/support
support@emporiaenergy.com
1-844-EMPORIA (367-6742)
Advertisement
Table of Contents
