Table of Contents
Advertisement
Technical Specifications
Input Voltage
Power Charge
Required
Breaker
Connector
Power Wiring
Enclosure
Temp Range
FCC ID: 2AS6P-EMEVSE1
Model: EMEVSE1
The Emporia Smart Home EV Charger contains FCC
ID: 2AS6P-EMEVSE1. This device complies with
part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of 20
centimeters between the radiator and your body.
Caution: Any changes or modifications not
expressly approved by Emporia void the user's
authority to operate the equipment.
Copyright © 2021-2024 Emporia Corp.
Designed in Colorado, USA. Manufactured in India.
208/240VAC 50/60Hz
11.5kW (240V/48A) / 9.6kW (240V/40A) /
10kW (208V/48A) / 8.3kW (208V/40A)
Dedicated 50A+ dual pole for 40A
Dedicated 60A+ dual pole for 48A
24' cable SAE J1772 or NACS connector
NEMA Type 14-50 (up to 40A) with < 6 ft long
cable, compliant with 2023 NEC Section
625.17(A)(3)(a)(ii) / Hardwired (up to 48A)
Watertight NEMA Type 4 indoor/outdoor
-22°F to 122°F (-30°C to 50°C)
603-00009 Rev D
IC ： 28084-EMEVSE1
CAN ICES-003(B) / NMB-003(B)
Advertisement
Table of Contents
