Sony DVP-S3000 Manual page 7

What cords will I need?
A udio / video / S- link connecting cord (supplied) (1)
White ILl White (L)
Red (R) Red (R)
S-link S-link
Hookups
When connecting the cord, be sure to match the color-
coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum
and noise.
IITo listento thesound through TVspeakers
Connect the TV using the audio/video/S-link
connecting cord (supplied).
CD/DVD player
TV
!
v,DEo i
IITo listen to the sound through speakers connected to
an amplifier
Connect the TV using a video connecting cord (not
supplied),
and the amplifier using an audio
connecting cable (not supplied).
CD/DVD player
I LINEOUT
R-AUDIO 1-L VIDEO J
W
INPUT
i
Qv,DEo I
I{O)L
I-- ^uo_ I
_oJR
Amplifier
Make the same connections when your amplifier conforms
to "Pro Logic."
Notes
• Do not connect this
player to a video deck.
If you view the pictures
on your TV after
making connections
shown on the right, a
picture noise may
,appear.
t
]CD/DVD 1
player
Depending on the TV or amplifier, the sound distortion
may occur because the audio output level is high. In this
case, set "AUDIO ATT" in "CUSTOM SETUP" to "ON" in
the menu. Fordetails, see page 44.
"_°lf your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord. You will get a better picture.
S video cable
(supplied)
CD/DVD player TV
(Continued)
Manufactured under license from Dolby Laboratories
Licensing Corporation.
"Dolby",
the doubled symbol
tin, "Pro Logic" and "AC-3" are trademarks of Dolby
Laboratories Licensing Corporation.
7 EN _