Playing A Video Cd - Sony DVP-S3000 Manual

Playing a VIDEO CD
ON/STANDBY indicator
2
/
_Sozcrf
o
o
34
0 0 IF 0 0 0
o o [I 0 o o
0 0 0
18 EN
• The operating procedure of DVDs
or CDs is different from that of
VIDEO CDs.
For details on playing a DVD, see
pages 10 to 17.
For details on playing a CD, see
pages 26 to 31.
"_" Youcan turn on the player
using the remote
PressPOWER when the
ON / STANDBY indicator on
the front panel is lit in red.
After following Step4
The menu screenmay
appearon the TV screen
depending on the VIDEO
CD. You can play the disc
interactively, following the
instructions on the menu
screen. (PBC Playback, see
page 21.)
Note
If you don't operate the player or
the remote for more than 30
minutes when a disc is not being
played, the power is
automatically turned off (Auto
Power Off function).
Refer to the instructions [
supplied with your disc. [
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
2
3
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
The ON/STANDBY indicator (red) changes to green and the
front panel display lights up.
Press zx, and place the disc on the disc tray.
With the label side
facing up
Press _.
The disc tray closes and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.