Playing A Dvd - Sony DVP-S3000 Manual

Playing a DVD
2 34
ON/STANDBY indicator
/
801_1 r
0
o
o
o
o
o
_U
,, i-I'_'-'i
i = i
0 0 0
0 o o
0 0 0
10 EN
• The operating procedure of
VIDEO CDs or CDs is different
from that of DVDs.
For details on playing a VIDEO
CD, see pages 18 to 25.
For details on playing a CD, see
pages 26 to 31.
"_" You can turn on the player
using the remote
Press POWER wl_en the
ON / STANDBY
indicator on
the frontpanel islit inred.
_€° After following Step 4
A DVD menu or title menu
may appear on the TV screen
(see page 13 or 14).
Note
If you don't operate the player or
the remote for more than 30
minutes when a disc is not being
played, the power is
automatically turned off (Auto
Power Off function).
Refer to the instructions
I
supplied with your disc. 1
I
Make settings on your TV.
Turn on theTV and select thevideoinputso that you canview
thepictures f rom this player.
2
3
4
When using an amplifier
Turn on theamplifier and select t heappropriate position s o that
you can listen tothesound from this player.
Press POWER to turn on the player.
The ON/STANDBY indicator (red) changes to green and the
front panel display lights up.
Press _, and place the disc on the disc tray.
With the playback
side facing down
Press t>.
The disc tray closes, and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.