Connection; Connecting A Tv Set; Connecting The Power Cord - Philips AZ5738 User Manual

Connecting a TV set

Note:
– Connect the system directly to the TV set.
●
Use the supplied composite video cable (yellow)
to connect the system's VIDEO OUT jack to
the video input jack (or labeled as A/V In, Video
In, Composite or Baseband) on the TV set.
●
To listen to disc playback of the system through
your TV, use the supplied audio cables to
connect AUDIO OUT jack (black) to the
corresponding AUDIO IN jacks ( red/white) on
the TV set.
IN OUT

Connecting the power cord

IMPORTANT!
– The type plate is located on the rear
of the set.
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
●
After everything is connected properly, plug in
the AC power cord to the power socket.
The type plate is located on the bottom
of the set.
Notes:
– The set is operated on AC power only.
– Never make or change any connection with the
power on.

Connection

~ AC MA INS
9