Technical Specifications - EuroLite LED STP-7 User Manual

Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse-holder on the rear panel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
IP classification:
Protection class:
Power connection:
Power output:
Fuse:
Lamp type:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
LED:
Flash rate:
DMX channels:
DMX input:
DMX output:
Cooling:
Control:
Preprogrammed in:
Beam angle (1/2 peak):
Housing color:
Attachment system:
Display type:
Dimensions:
Weight:
100-240 V AC, 50/60 Hz
180 W
IP20
Protection class I
Mains input via P-Con (blue), mounting version
Power supply cord with safety plug (provided)
1 x P-Con (gray), mounting version
5 x 20 mm, T 1.6 A Fuse replaceable
LED lamp
:
45° C
a
:
60° C
C
0.5 m
0.1 m
7 x 3 W high-power cold white (CW)
7 x 7 W high-power 3in1 TCL RGB (homogenous color mix)
0 - 20 Hz
3; 6; 4; 10; 12; 15
1 x 3-pin XLR (M) mounting version
1 x 3-pin XLR (F) mounting version
Cooling fan
Stand-alone; Sound to light via Microphone; Master/slave
function; DMX; QuickDMX (optional); W-DMX by wireless
solution (optional); CRMX by LumenRadio (optional)
Light´J; LED PC-Control 512; Light Captain
Spot 2°
Wash effect 40°
Black
Mounting bracket
Monochrome 4 digit 7-segment LED display
Length: 1 m
Depth: 12 cm
Height: 14 cm
4 kg
34/36 00110254, Version 1.2