Mitsubishi Electric Diamond View 1995SL Service Manual page 31

1995SL CRT Monitor Service Guide
Table 5 - TCO 99 Spec
A. Ecology
1 General Criteria
1.1 Manufacturing Processes
1.1.1 Ozone Depleting Substances:
* PCB and any Process shall not use any ozone depleting substance.
1.1.2 Chlorinated Solvent:
* PCB and any Process shall not use any Chlorinated Solvent substance.
1.2 Environmental Hazards
1.2.1 Mercury and Cadmium in Electronic Components:
* None of electronic components contain any mercury or cadmium.
1.2.2 Flame Retardants in Plastic Components:
* Plastic > 25g shall not contain retardants of organically bound Chloride or Bromide.
1.3 Preparation for Recycling:
1.3.1 Labelling of Plastic:
* Plastic > 25g shall be labelled in accordance with ISO11469
1.3.2 Variety of Plastic:
* Plastic >100g shall be made from the same type of plastic material
1.3.3 Painting of Plastic:
* Plastic > 25g shall not be having paint weight >1% of plastic weight.
* Mould decoration (IMD) is not allowed
* All paints, lacquers, vanishes or colour additives used shall be declared by the type and mount.
1.3.4 Metallization of Plastic Housing:
*The plastic housing shall have neither internal nor external metallization.
Chapter 1 Engineering Specification
28