Canon UC7000 Instruction Manual page 23

Turning off the tally lamp
J
^MENU
►TALLY LAMP... • • .OFF
(see p. 18)
The tally lamp lets you know the camera is
recording. However, it may be reflected into the
lens during close-up recording or when recording
through glass.
1. Open the camera menu and move the cursor to TALLY LAMP.
2. Select the OFF setting and close the menu.
• The tally lamp no longer lights up during recording.
Notes:
• Sunlight or fluorescent light falling on the sensor may shorten the controller's operating distance by
interfering with its infrared signals.
• The camera may have difficulty picking up the remote control signals at extremely close range.
• Do not leave the controller exposed to direct sunlight, or in hot or humid places.
• When changing exhausted batteries, replace them all at once.
23