Table of Contents
Advertisement
Water hardness level
°dH
0 - 6
7-8
9-10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
A notice:Set your device to the
determined water hardness level.
→
"Setting the softening system",
page 27
If the water hardness level is 0 - 6 °dH,
you can avoid using special salt for
dishwashers and switch off the
softening system.
→ "Switch off the softener system",
page 28
10.2 Setting the softening
system
Set the device to the water hardness
level.
Determine the water hardness level
1.
and the appropriate setting value.
→ "Overview of the water
hardness settings", page 26
press.
2.
To open the basic settings,
3.
press.
aThe display shows H:xx.
The display shows .
or press repeatedly until the
4.
appropriate water hardness level is
set.
The value H:04 is set at the factory.
To save the settings,
5.
Press for 3 seconds.
Hardness range
soft
soft
medium
medium
medium
hard
hard
hard
3 seconds
a
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
10.3 Special salt
You can soften water with special
salt.
Pour in special salt
If the special salt refill indicator lights
up, fill special salt into the special salt
storage container immediately before
starting the program. The consumption
of special salt depends on the degree of
water hardness. The higher the water
hardness, the higher the consumption
of special salt.
DANGER!
Cleaner can damage the softening
system.
Only fill the storage container of
▶
the softening system with special
salt for dishwashers.
Special salt for dishwashers can
damage the washing container
through corrosion.
▶
To ensure that overflowed special
salt is rinsed out of the rinsing
container, fill the special salt into the
special salt storage container
immediately before the program
starts.
Unscrew and remove the lid from
1.
the special salt storage container.
Softening system
Setting value
H:00
H:01
H:02
H:03
H:04
H:05
H:06
H:07
27
Advertisement
Table of Contents
