Troubleshooting - Levoit Core 300S User Manual

Smart true hepa air purifier
Hide thumbs Also See for Core 300S:
Table of Contents

Advertisement

T R O U B L E S H O OT I N G
Problem
Air purifier will not turn on or
respond to button controls.
Airflow is significantly
reduced.
Air purifier makes an unusual
noise while the fan is on.
Strange smell coming from
the air purifier.
16
Possible Solution
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using
the air purifier and contact Customer Support (see 19).
The air purifier may be malfunctioning. Contact Customer
Support (see 19).
Make sure the filter is removed from its packaging and
properly in place (see page 7).
Tap
to increase the fan speed.
Leave 38 cm / 15 inches of clearance on all sides of the air
purifier.
The pre-filter may be clogged by large particles, such as hair
or lint, blocking airflow. Clean the pre-filter (see page 14).
Replace the filter (see page 15).
Make sure the filter is properly in place with plastic packaging
removed (see page 7).
Make sure the air purifier is operating on a hard, flat, level
surface.
Replace the filter (see page 15).
The air purifier may be damaged, or a foreign object may
be inside. Stop using the air purifier and contact Customer
Support (see page 19). Do not try to repair the air purifier.
Clean the filter, or replace if necessary.
Contact Customer Support (see 19).
Make sure not to use your air purifier in an area with high

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lap-c301s-waur

Table of Contents