Black & Decker ID1901-1BDC Use And Care Manual page 11

Shaking
To ensure even cooking, some foods require shaking during the cooking
process. Remove the Basket from the appliance. Gently shake the contents as
needed and place them back in the appliance to continue cooking.
CAUTION: The Basket will be hot. Wear an oven mitt during this procedure.
1. Place the Basket on a heat-resistant surface.
2. Shake the ingredients in the basket.
3. Return the Basket to the appliance to finish cooking.
Tips
•
Foods that are smaller in size usually require a slightly shorter cooking time
than larger foods.
•
Large quantities of food require a longer cooking time than smaller quantities.
•
Adding a bit of vegetable oil to fresh potatoes is suggested for a crispier result.
When adding oil, do so just before cooking and add only a small amount onto
the potato.
•
Snacks normally cooked in an oven can also be cooked in the Air Fryer.
•
Use premade dough to prepare filled snacks quickly and easily. Premade dough
also requires a shorter cooking time than homemade dough.
•
You can use the Air Fryer to reheat foods. Simply set the temperature and time
to however warm you want your food.
Cleaning
Clean the Air Fryer after each use. The Basket and the Fry Tray are coated with
a special nonstick surface. Never use abrasive cleaning materials or utensils on
these surfaces.
Note: The Basket is dishwasher safe.
1. Remove the Power Cable from the wall outlet and be certain the appliance is
thoroughly cooled before cleaning.
2. Wipe the outside of the appliance with a warm, moist cloth and mild detergent.
3. Clean the Basket and the Fry Tray with hot water, a mild detergent, and a
nonabrasive sponge.
Tip: Should the Basket contain difficult-to-remove food particles, soak in hot,
soapy water for 10 minutes.
4. Clean the inside of the appliance with a warm, moist cloth or nonabrasive sponge
with a small amount of mild detergent.
5. If necessary, remove unwanted food residue from the heating element with a
soft cleaning brush.
Storage
1. Unplug the appliance and let it cool down thoroughly.
2. Make sure all components are clean and dry.
3. Place the appliance in a clean, dry place.
ID1901-1BDC_29792_EF_IB_A.indd 11 ID1901-1BDC_29792_EF_IB_A.indd 11
11
5/30/23 4:10 PM 5/30/23 4:10 PM