Subscribe to Our Youtube Channel
Related Manuals for GRASS VALLEY K-FRM-X-UPG-LX-KIT
Summary of Contents for GRASS VALLEY K-FRM-X-UPG-LX-KIT
- Page 1 K-FRM-X-UPG-LX-KIT K-Frame X Linux Upgrade Quick Start Guide Steps to replace the Frame Controller SSD and Image Store HDD with new OS drive Frame Controller Image Store 13-06108-000-AB 2022-5-27...
- Page 2 Step 1) Frame Controller - Save off any Eng Setup and Show files that are needed for the future from the existing Controller SSD to be replaced. Copy them to the menu or other remote storage location. Step 2) Image Store - Save off any images, clips, etc that you will need for the future from the Image Store HDD.
- Page 3 Install Software V16.2.0 Step 18) Run the V16.2.0 installer (K-FrameSetup.exe) included on the provided thumb drive in the upgrade kit to install the V16.2 K-Frame Installer onto the menu PC, frame, and panel. For Korona this is on the same PC using the Menu and Korona Panel buttons in the Installer. Note: Wait for the IP and PTP boards to update themselves.
- Page 4 Step 25) Enter the letter m [M] for the Multi Boot Configuration menu, at the prompt: ->M Result: Step 26) Enter the letter Y to begin the reprogramming of the HADs, at the prompt: ->Y Result: HADs are being erased and programmed which cannot be seen in the SSH session, however results of successful HAD updates can be seen on the console as well as viewed in the K-Frame, Frame Message Logs.
Need help?
Do you have a question about the K-FRM-X-UPG-LX-KIT and is the answer not in the manual?
Questions and answers