(B) Sending A Program Number - Kawai MR380 Owner's Manual

(a) Transmitting with the TONE SELECTORs
'You can use the ten TONE SELECTORs during normal playing to
transmit program numbers 0 through 9 shown in the chart below.
FULL ORGAN
Transmission with these TONE SELECTORs can be switched on and off
as described below.
(1) Enter the programming mode (see p. 7).
The LEDs for CHORUS and PIANO? will flash. The flashing of the
PIANO1 LED shows that the instrument is in the programming mode for
transmitting the program number, so move on to the next step.
* No sound will be played if the keyboard is pressed at this time.
(2) Press the highest black or white key.
Pressing a black key (OFF) disables transmission by the TONE -
SELECTORs.
Pressing a white key (ON) enables transmission.
18