Wolf R304 Use & Care Information Manual page 13

W O L F G A S R A N G E S U R FAC E O P E R AT I O N
I N F R A R E D C H A R B R O I L E R
This optional feature is designed with an
infrared burner to give the highest quality and
most efficient method of gas grilling. The
burner becomes an orange-red color at the
surface of the ceramic tile, and when it glows,
it transfers an intense heat to the food. This
sears the outside of the food, leaving the
inside tender and juicy.
The infrared burner is designed to operate at
16,000 Btu/hr (4.7 kW) at 100% full heat output.
For even cooking, we recommend using the
charbroiler blank-off plate when grilling most
food.
Do not use cookware on the charbroiler
grate.
Stainless
Charbroiler stainless steel grate
Dimensions in parentheses are in
millimeters unless otherwise specified.
B L A N K - O F F P L AT E
To convert the charbroiler to the lower heat
output, install the blank-off plate packaged in a
separate envelope with your gas range. This
3
2
placed directly on the ceramic tiles.
IMPORTANT NOTE: Install the blank-off plate
when the charbroiler is off and is completely
cool. Be sure to remove the plastic film from
the blank-off plate before installing.
To install the blank-off plate, remove the
stainless steel grate and wire mesh screen.
Position the blank-off plate in the middle of the
ceramic tiles and reinstall the wire mesh
screen. Make sure that the wire mesh screen
is positioned with the notch at the left rear.
Reinstall the stainless steel grate. Refer to the
illustrations below.
Steel
Grate
Igniter
Blank-Off
Plate
Blank-off plate installation
/ " x 11" (70 x 279) stainless steel plate is
4
Use caution when placing the blank-off
plate directly onto the ceramic tiles so
they are not chipped or otherwise
damaged. Avoid any contact with the
igniter; it is fragile and can chip or break.
Wire Mesh
Screen
13