Maintenance; Carbon Filter; Defrosting The Appliance; Cleaning The Appliance - V-ZUG Cooler V4000 Operating Instructions Manual

8 Maintenance

8.1 Carbon filter

The carbon filter is located in the compartment above the
fan.
It guarantees the best air quality.
Replace the carbon filter every 6 months.
q
When the reminder is set, a message on the display
prompts you to change it.
The carbon filter can be disposed of with the regular
q
household waste.
8.1.1 Removing the carbon filter
Fig. 29
u Pull out the compartment Fig. 29 (1).
u Remove the carbon filter Fig. 29 (2).
8.1.2 Inserting the carbon filter
Fig. 30
u Insert the carbon filter as shown in the diagram
Fig. 30 (1).
w The carbon filter clicks into place.
If the carbon filter is pointing downwards:
u Push the compartment in Fig. 30 (2).
w The carbon filter is now ready for use.

8.2 Defrosting the appliance

WARNING
Improper defrosting of the appliance!
Injuries and damage.
u Do not use mechanical equipment or other methods to
speed up the defrosting process other than those recom‐
mended by the manufacturer.
u Do not use electrical heating or steam-cleaning appli‐
ances, naked flames or defroster sprays to defrost.
u Do not use sharp objects to remove ice.
* Depending on model and options
Defrosting is performed automatically. The water from the
thawing process drains through the outlet and evaporates.
Water drops or a thin layer of frost or ice can form on the
back wall; this is a completely normal part of the applian‐
ce's function. This must not be removed.
u Clean the drain opening regularly (see 8.3 Cleaning the
appliance) .

8.3 Cleaning the appliance

8.3.1 Ready
WARNING
Danger of electric shock!
u Remove the refrigerator connector or interrupt the power
supply.
WARNING
Risk of fire
u Do not damage the refrigeration circuit.
u Empty the appliance.
u Remove mains connector.
-or-
u Activate CareMode.
8.3.2 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
u Only use soft cleaning cloths and ph-neutral all-purpose
cleaners.
u Do not uses abrasive sponges or steel wool which may
cause scratches.
u Do not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
u Plastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
u Metal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
u Drain hole: remove deposits using a thin item (for
example a cotton bud).
8.3.3 Cleaning the equipment
NOTICE
Improper cleaning!
Damage to the appliance.
u Only use soft cleaning cloths and ph-neutral all-purpose
cleaners.
u Do not uses abrasive sponges or steel wool which may
cause scratches.
u Do not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
Clean with a soft, clean cloth, lukewarm water and a little
washing up liquid:
- FlexBox
- Lid for ColdFresh
- Drawers
- Egg tray*
Clean with a damp cloth:
- Telescopic rails
Please note: the grease in the tracks is there for lubrica‐
tion purposes and must not be removed!
Maintenance
15