Table of Contents
Advertisement
PANTTolCommANeliUCyataleyal
Volume Adjustment
To adjust volume
Turn ATTENUATOR clockwise to increase volume. Turn it
counterclockwise to decrease volume.
Before turning ON the power, turn ATTENUATOR fully
counterclockwise (ce dB) to avoid damage to the speakers.
ATTENUATOR
Sound Quality Adjustment
To adjust the tone quality
Turn TREBLE clockwise to increase treble sound.
Turn BASS clockwise to increase bass sound.
BASS
TREBLE
6
6
6
6
8
8
8
8
-19
+10
-10
+10
To increase bass sound
Depress BASS BOOST.
Normally, set the switch to OFF (released).
BASS BOOST
coon
[|] oFF
Graphic Equalizer
Depress ADAPTOR.
Be sure to turn OFF (released) ADAPTOR when the
ADAPTOR jacks are not used. If not, sound cannot be heard.
When a graphic equalizer is connected
Turn ON the ADAPTOR switch.
ADAPTOR
'=o
ro ON
(] OFF
Balance Adjustment
To change the relative strength of the left and right
speaker output
Adjust BALANCE to correct stereo imaging, when the
speaker position is not symmetrical.
BALANCE
LEFT ®
RIGHT
To listen to the sound input to the unit without passing through
the circuits of tone controls
Depress SOURCE DIRECT. The indicator lights up and the circuits
of BASS BOOST, BASS, TREBLE and BALANCE controls are
disengaged.
To use the TREBLE and BASS controls, BASS BOOST switch
and the connected graphic equalizer simultaneously
Turn the controls slowly from the standard position by confirming
the sound effect. If not, sound may be distorted.
9
Advertisement
Table of Contents
