Advertisement
SECTION
B
Dash
Mount
Assembly
1.
Remove collar from ball-joint socket
2.
Place collar over ball end oft-notch/ball adapter,
then place ball end in socket.
3.
Tighten collar onto socket.
4.
Place t-notch hitch 1n opening
5.
SI de up to lock in place
Removal
6.
Press lever to release
t-notch.
7.
Slide down to
remove.
Installation
Clean the mounting surface using supplied
wipe*. Remove backing from adhesive base,
place mount in position and press firmly.
*Supplied
cleaning
wipe
may cause discoloration of
certain plastics, vinyls and painted
surfaces.
It is
recommended to
test
in
an inconspicuous area first.
~0
~P(Ji
5
(EN)
Advertisement
