Propeller installation. DPX
1. Control lever in "Ahead" position.
2. Use the tool supplied when removing and installing
propellers.
3. Lubricate both propeller hubs. Use Volvo Penta grease
828250-1.
4. Push the front propeller onto the shaft. Screw on large
locknut and tighten with tool. Tightening torque 50–70
Nm (5–7 kpm).
5. Control lever in "Astern" position.
6. Push rear propeller onto the shaft and tighten with
nut. Use a 30 mm socket and tighten to 25–35 Nm
(2.5–3.5 kpm)
7. Screw in the lock screw and tighten to 70–80 Nm
(7–8 kpm).
57