Page 1
IP NETWORK PA SYSTEM ■ T-77120W/77240W/77350W/77500W ■ NETWORK AUDIO ADAPTER T-77120W 220V~240V 50Hz 150W DC OUTPUT(Controllable) LINE SHORT SHORT STATUS POWER 100V OUTPUT OWNER'S MANUAL Please follow the instructions in this manual to obtain the optimum results from this unit.
1. SAFETY PRECAUTIONS Be sure to read the instructions in this section carefully before use. Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. We also recommend you keep this instruction manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling.
Page 4
SAFETY PRECAUTIONS When the Unit is in Use When Installing the Unit Do not place heavy objects on the unit as this may Never plug in nor remove the power supply plug cause it to fall or break which may result in with wet hands, as doing so may cause electric personal injury and/or...
2. GENERAL DESCRIPTION The equipment adopts the integrated design of digital power amplifier module and metal cover, with waterproof and rustproof cover structure; install in outdoor columns of various broadcasting management areas, used for program broadcast and local broadcast in parks, squares, streets, tourist attractions and other outdoor places.
4. NAMES AND FUNCTIONS DC OUTPUT(Controllable) LINE SHORT SHORT STATUS POWER 100V OUTPUT 6 8 9 10 11 1. AC power cord; 2. 100V speaker output interface; 3. Network port; 4. Cooling fan; 5. AUX IN—Auxiliary input interface; 6. LINE OUT—Line output interface; 7.
5. TERMINAL CONFIGURATION OPERATING INSTRUCTIONS The terminal needs to be configured before installation, before installation, need make a installation plan including terminal name, terminal IP address, gateway IP address, server IP address, location of terminal installation, and label the information on the terminal to ensure the convenient use of the device.
Page 8
5. TERMINAL CONFIGURATION OPERATING INSTRUCTIONS The configuration steps: Step 1: Connect the terminal and the computer installed with the terminal configuration tool program by the network wire, Plug in the power until the termianl power indicator is on. Step 2: double-click to open the shortcut icon of “ terminal configuration tool”, select the network card first, and left-click the “query”...
Page 9
5. TERMINAL CONFIGURATION OPERATING INSTRUCTIONS Step 5: If multiple terminals are in the same network segment, you only need to modify the IP address of one terminal, it is needed to click on the terminal in the queried terminals list, then cancel the choice of broadcast on the left interface, modify the IP address and click for configuration.
6.APPLICATIONS T-7700I7 NETWORK PA CONTROLLER T-7700 LAN/WAN AUX 1 AUX 2 T-7770 T-7702A T-77120W T-77240W T-77350W T-77500W 220V~240V 50Hz 220V~240V 50Hz 220V~240V 50Hz 220V~240V 50Hz 150W 300W 400W 600W DC OUTPUT(Controllable) DC OUTPUT(Controllable) DC OUTPUT(Controllable) DC OUTPUT(Controllable) LINE SHORT SHORT...
9.INStALLATION DIAGRAM Align and tighten The wall opening is 10mm, the expansion screw and 8mm expansion screws with the mounting hole are embedded Wall After adjusting the vertical direction of the whole machine, use 4mm self tapping to hit the wall for fixation to prevent swinging...
Need help?
Do you have a question about the T-77120W and is the answer not in the manual?
Questions and answers