Microphone; Connecting Peripherals - Winbook J1 User Manual

J series manual 4/2/01 3:27 PM
External Speakers & Microphone
The sound system is capable of providing high-quality sound to
external speakers and receiving and processing sounds from an external
micro-phone or external sound source. To connect external speakers,
follow the instructions provided with your speakers. When the speakers
are connected, the built-in speakers of your WinBook notebook will
automatically be disabled. An external microphone will disable the
built-in microphone.

Connecting Peripherals

Your WinBook notebook has ports (serial, parallel, USB), a slot (PCMCIA)
and jacks (AC power, microphone and audio out) that allow you to connect
peripheral devices to your computer.
Printer
Whether you purchase a portable computer or a desktop model, you will
probably connect the printer to the computer via the parallel cable. You
might also connect to a printer via a network connection, a serial connec-
tion or a USB connection. Whatever the nature of the connection, you will
need to set up the necessary drivers for the printer. You can vary the port
connection (or network setup) at the step where it is requested. If you will
be connecting the device to a parallel or serial port, you should shut down
the system before connecting the printer (you do not need to shut down
to connect a USB printer). If your printer is Plug and Play compliant,
your system will detect the new hardware on boot and begin the process
of setting up the printer.
Page 75
Chapter 4: Desktop Operation
The Sound Recording
allows for significant
control of sound quality.
You can read the documenta-
tion in Windows for information
on the sound quality.
If you connect to your
printer via a network,
contact your network
administrator for details on the
printer and the specific setup
for your network connection.
You might need to have the
driver disk that came with your
printer available for the installa-
tion of the printer drivers.
4.9