Canon imagePASS-N1 Service Manual page 77

3. Select [Tools] > [Setup].
4. Check the settings of server, network, printer and
PDL, and press [Save Changes] even if there is no
change. At that time, the setting will not be
completed unless [Save Changes] is pressed.
Example : Select [Server] > [General].
Check that the items in the General Setup are set, and
perform [Save Changes] even if there is no change. The
setting will not be completed unless [Save Changes] is
pressed.
5. Press [Exit Setup] after all settings are completed.
72
7. INSTALLATION PROCEDURE