Page 2
Translation of the original instructions GYSFLASH 32.12 PL SAFETY INSTRUCTIONS This manual contains safety and operating instructions, to be followed for your safety. Please read it carefully before using the device for the first time and keep it for future reference. This device may only be used for charging and/or power supply within the limits indicated on the device and manual.
Translation of the original instructions GYSFLASH 32.12 PL Connection / disconnection : • Ensure that the charger is not connected to the mains before connecting or disconnecting clamps to the battery terminals • Always ensure the Red clamp is connected to the «+» battery terminal first.
GENERAL DESCRIPTION The GYSFLASH 32.12 PL is a high power stabilized power supply based on inverter technology. Designed to support 12 V batteries (liquid/AGM/gel and lithium LiFePO4) in vehicles in the diagnostic phase or in the showroom, it also guarantees an ideal charging quality for the maintenance of the most advanced models.
Page 5
7.7 A 13.5 A 16.5 A 27 A 30 A • Load curve Lead: The GYSFLASH 32.12 PL uses an advanced 7-step lead charging curve that guarantees the optimal performance of your lead bat- tery. Analysis Recovery Test Desulfation Charging...
Page 6
• Protections : The GYSFLASH 32.12 PL is equipped with features to protect it against short circuits and polarity reversal. It has an anti-spark feature which prevents sparks whilst connecting the device to the battery. This charger has double insula- tion and is safe to use with the battery in situ as it will protect the vehicle’s on-board electronics.
Translation of the original instructions GYSFLASH 32.12 PL TROUBLESHOOTING, CAUSES, SOLUTIONS Troubleshooting Causes Solutions • Polarity reversal • Check that the clamps are correctly connected • Battery voltage is too high Indicator flashes. • Verify that it is a 12 V battery.
Need help?
Do you have a question about the GYSFLASH 32.12 PL and is the answer not in the manual?
Questions and answers