Advertisement
e Optical servo (Head amplifier) P.C.B.
. Remove the cabinet and front panel.
5. Remove
the
disc clamper
magnet
from
the disc
. Disconnect connectors
(CN405
~ CN409,
CN411,
clamper.
CN412, CN501) of main P.C.B.
. Remove the traverse unit.
The entire traverse unit
can then be removed from the unit.
. Temporarily faster the tray and front panel.
After
that, connect only connectors (CN405, CN406 and
CN408) remove in step 2.
. Remove
the
insulator
rubber
and
optical
servo
P.C.B. of traverse unit.
. Mount the traverse unit on the traverse unit base.
. Connect
connectors
(CN407,
CN409,
CN411,
CN412, CN501) removed in step 2.
. Shift it as in Fig, 33 check.
4. Turn
over the traverse unit and remove
the nuts.
The tray and the traverse unit can then be separated.
Spring (Silver)
Ss
pring
a
)
(Yellow)
g
2
S
db
n
A
Spri
: Le etiow! EY
(silver)
Optical servo
P.C.B.
a
Traverse
unit ass'y
Optical servo P.C.B.
Traverse
(03 P.C.B.)
unit base
Fig. 33
Advertisement
