Advertisement
SL-P
* For removal of each part, refer to disassembly instruction on pages 17 ~ 22.
e@ Main P.C.B.
1, Remove the cabinet.
2, Check each part.
(Part side}
3. Check the P.C.B. as shown in Fig. 27.
3. When checking the soldered parts and replacing them,
(1) Remove the front panel and main P.C.B.
(2) Pull out the connector (CN803) of main P.C.B.
(3) Place the main P.C.B. as shown in Fig. 25.
Note:
When checking as in Fig. 25, be sure to connect
the ground spring of main
P.C.B. to the chassis
lead wire.
. Also remove the 8 setscrews of reinforcement plate,
headphone
amplifier
P.C.B.
and
keyboard/display
P.C.B.
Timer play /auto
Pause/ auto cue
/ selector knob
Remote control
receiver
Keyboard/
display P.C
5. Shift it as in Fig. 29 and check.
:
Note:
Take care not to damage F. L.
e Keyboard/display P.C.B.
1. Remove the cabinet.
2, Remove the front panel setscrew.
3. Remove the front panel.
Advertisement
