Advertisement
11. Auto pause play
In this mode, the player is automatically
switched to the pause mode at the end
of each track during normal or program
disc play.
eSet
the
timer
play/auto
imer pi
[off]
auto pause
pause/auto cue selector to
eee
Ta
the auto pause position.
eThe player is automatically switched to the pause mode at the
end of each track. To continue disc play, press the play button.
elf the selector is set to auto pause while a disc is
being played, auto pause will be activated at the
end of the next track.
eTo cancel the auto pause play mode, set the timer
play/auto
pause/auto
cue
selector
to the
position.
e@Return the selector to the
position when the auto pause
function is no longer needed.
12. Program confirmation
@ Press the recall button.
Example: When
the third, fifth, and first tracks
have
been
programmed,
by pressing
this button, will cause each track and
sequence number to be displayed, each
time the recall button is pressed.
To return to the beginning, press the button once
again, at the end of the last suquence.
@When the button is pressed, the programmed tracks are shown
in order, on the display panel.
37
--
|
4
5
-- @
wd
poo
-- 3
13. Timer play
1. Turn on the power switches of all components
in the timer
play chain.
2. Set the amplifier input selector
to the position for this player.
timer play _ [off]
suite pause
ute
CUS
Cor
3. Insert a disc in the holder.
4. Confirm
the present time and
set the audio timer to the
desired
start and stop times.
5. Turn the audio timer on. The audio timer will now turn power
off to all components in the timer play chain.
6. The disc will now be played from track one at the preset time.
The
timer of the audio timer should be off at this time.
BH Connections
Wail socket
Audio timer
(option)
Amplifier
(option)
SL-P3
Leave
the timer play/auto
pause/auto
cue
selector
in the off
position when the timer play function is not being used.
@ The Output Level Memory Function
This unit memorizes
the last output level setting when
the
power is switched off.
The circuit is powered by a fithium
battery and should last about 8 years.
To determine if battery replacement is necessary:
1. Remove any disc from the disc holder.
2. Switch
the power ON and press the output level control
button until the red indicator (Marked 10) illuminates.
3. Switch the power OFF.
:
4. Switch the power ON once more.
If the red indicator is
no longer ON, the battery must be replaced.
MINSTALLATION
@ This unit incorporates many sensitive optical
components. To enjoy optimum performance
at all times, avoid
using this unit under the
following conditions.
ein a closed vehicle or other location where the temperature
could exceed
100°F
(40°C).
For long periods of time in direct sunlight.
eVery cold places.
(below 40°F; 5°C)
eVery humid
focations.
eNear
a heat outlet or heating appliance.
eDusty or smoky locations.
eLocations prone to vibrations.
eWhen
placed on an unstable
or uneven
surface.
eNear appliances
generating
strong magnetic
fields.
elmmediately
above
or below
a radio, tuner,
amplifier
or
television set.
eWithin reach
of children.
@ Do not place near a tuner or television.
This unit uses high frequency signals and can cause interference
with radio and television reception. If this occurs, move this unit
farther away from the radio or television or change from an
interior to an exterior television antenna.
@ CONCERNING COMPACT DISCS
Handling precautions EEE
Only compact discs identified with this mark
fice
can be used with this player.
IS(G
DIGITAL AUDIO
Observe
the following
precautions to enjoy the same
outstanding sonic performance from your Compact Discs
for many years.
eHold compact discs by the edges so the surface is not soiled
with fingerprints.
Be careful not to scratch the surface with fingernails or other
sharp objects, particularly when inserting and removing discs
from their cases.
eDo not bend the disc.
eDo not use record cleaning sprays or static electricity preven-
tion liquids.
Do not wipe with benzene, thinner or any other solvent. If the
surface is soiled, wipe gently with a soft, damp (water only)
cloth.
eWhen wiping discs, always move the cloth directly outward
from the center of the disc, not in a circular motion as with
standard phonograph records.
O (Yes)
x (No)
(In Compact Discs, a circular scratch along a line of pits is more
likely to cause errors than a straight scratch across many lines
of pits.)
@ Do not block the ventilation openings.
This unit is equipped
with ventilation openings to prevent the
internal temperature from rising too high. Therefore,
do not
operate it with a tablecloth or other covering placed over the top
or with the unit placed
on a bed, deep
carpet or other soft
surface. If proper ventilation is obstructed, the internal tempera-
ture
will rise and
the
laser
diode
protection
circuit
will be
activated to shut off the player.
@ In locations where ventilation is insufficient.
@ In locations where the rear panel is less than
10 cm away from the wall or back of an audio
rack.
@ Do not place heavy objects on top of this unit.
lf the disc is brought from a cold environment into a warm room,
dew may form on the disc. Wipe this off with a soft, dry cloth
before using the disc.
eDo not try to dry discs with a hair dryer.
Do not write on the label side with a ball-point pen, hard pencil
or other writing utensil.
Storage precautions sau
@Be sure to store discs in their cases to protect them from dust,
scratches
and warping.
¢Do
not place or store discs in the following places:
1) Locations exposed to direct sunlight.
2) Locations with high humidity or a lot of dust.
3) Locations
directly
exposed
to a heat
outlet
or heating
appliance.
4) In the glove compartment or rear ledge of an automobile.
Advertisement
