Table of Contents
Advertisement
WiebeTech LLC
4.2.2 LCD functions:
Alarm Mute
To turn off the alarm sound when an error occurs
Reset/Shutdown
To reset or shutdown the controller
To use "Quick Install" to set up a volume by three steps. Please refer to section 4.3
Quick Install
for configure via the web-based GUI
View IP Setting
To view current IP address, subnet mask and gateway
To set up the IP address, subnet mask and gateway. You can choose to use DHCP
Change IP Config
server (for IP address allocation) or manually specify the IP address
To restore factory defaults:
Default Password: 1234
Reset to Default
Default IP address: 192.168.0.1
Default subnet mask: 255.255.255.0
Default gateway: 192.168.0.254
4.2.3 RTX-UR LCD Menu Diagram
Use the following chart for reference when following the instructions in 5.2.4 through 5.2.7 for setting up
the RTX according to your network type.
Main Menu
[Reset/Shutdown]
WiebeTech
RTX
[Change IP Config]
[Reset to Default]
R T X - U R U s e r ' s M a n u a l
nd
rd
2
Menu Screen
3
[Alarm Mute]
(RAID 1/RAID 3/
[Quick Install]
RAID 5/RAID 6)
[192.168.000.001]
[View IP Setting]
[IP Subnet Mask]
[255.255.255.0]
[192.168.000.254]
th
Menu Screen
4
Menu Screen
[▲Yes
No▼]
[Reset]
[Shutdown]
Volume Size
RAID 0
(xxxxxx M)
Apply The
xxxxxx MB
[IP Config]
[Static IP]
[IP Address]
[IP Gateway]
[DHCP]
[IP Address]
[IP Subnet
[Static IP]
[IP Gateway]
[▲Yes
No▼]
th
5
Menu Screen
[▲Yes
No▼]
[▲Yes
No▼]
Adjust Volume
[▲Yes
Config
No▼]
[▲Yes
No▼]
Adjust IP address
Adjust Submask IP
Mask]
Adjust Gateway
[Apply IP
[▲Yes
Setting]
No▼]
Size
IP
- 9 -
Advertisement
Table of Contents
