Advertisement
WiebeTech LLC
Hard Drive Installation
If you purchased your RTX with pre-configured drives, you may skip to the next section.
Install a SATA (Serial-ATA) hard drive into each bay. With TrayFree™ technology, this process
couldn't be easier! Simply pull the ejection handle to open the bay door, slide in your SATA drive, and
shut the door behind it. The drive is inserted with the label up and the SATA connection on the drive
inserted first. With the RTX400 & RTX600H, you can lock the bay for additional security, but make sure
to unlock it before pulling on the ejection handle again.
RTX400-UR
R T X 4 0 0 - U R & R T X 6 0 0 - U R U s e r ' s M a n u a l
NOTE: If any of the drives are inaccessible after
powering on the unit, try the following steps:
1. Turn off the power.
2. Remove the drive(s) in question.
3. Reinsert the drive(s).
4. Turn on the power.
RTX600-UR
- 4 -
Advertisement
