Riello RS 64/M MZ Installation, Use And Maintenance Instructions page 44

Potentiometer kit with load position indication
Burner
RS 64/M MZ
Gas flange kit DN80
Burner
RS 64/M MZ
Electromagnetic interference protection kit
If the burner is installed in places particularly subject to radio
disturbance (emission of signals exceeding 10 V/m) due to the
presence of an INVERTER, or in applications where the length of
thermostat connections exceeds 20 metres, a protection kit is
available as an interface between the control box and the burner.
Burner
RS 64/M MZ
Ground fault switch kit
Burner
RS 64/M MZ
UV sensor kit
Burner
RS 64/M MZ
Gas trains in compliance with EN 676
Please refer to manual.
The installer is responsible for the addition of any
safety device not foreseen in this manual.
ATTENTION
20169372
Appendix - Accessories
Code
3010109
Code
3010439
Code
3010386
Code
3010321
Code
20144943
42 GB