Table of Contents
Advertisement
HYMD500B Operation – Control Panel
!
Ensure you understand the whole Instruction Manual before any operation
1.
Battery Switch – Turns the battery on or off
2.
Front Light Switch – Turns the front light of the machine on or off
3.
Speed Selection Switch – Changes speed of the machine per
requirement.
4.
Tilt Switch – Tilts the bucket front and back
5.
Voltmeter – Shows the current charge state of the battery
6.
Key Switch – Turns the whole machine on or off.
HYMD500B Operation – Pre-Operation Checks
!
Ensure you follow all Pre-Operation check before using the starting the machine
1.
Check Tyres for adequate pressure
2.
Ensure every nut & bolt secured during assembled is tightened
sufficiently
3.
Ensure bucket is empty, and not tilted forward at all.
4.
Ensure the OPC Lever is in the up position
Operation
1
2
3
4
www.hyundaipowerproducts.co.uk
5
The OPC will stop the machine
from moving.
Up = Engaged (Stop)
Down = Disengaged (Go)
23
6
Advertisement
Table of Contents
