Assembly
HYMD500B Assembly – Battery Charging
NEVER CONNECT YOUR MACHINE DIRECTLY TO YOUR POWER SUPPLY
USING THE POWER SUPPLY CABLE. THIS IS INCORRECT CHARGING AND
WILL CAUSE DAMAGE TO YOUR MACHINE AND/OR INJURY.
The HYMD500B has a 2 part charger, a Power Supply Cable and a
Charger Adapter.
To ensure correct charging, you MUST always use the Power Supply
Cable connected to the Charger Adapter. The outlet from the Charger
Adapter is then connected to your machine (as seen below).
You can check the state of charge of the machine on the Voltmeter
on the Control Panel.
Charging Input
Power Supply Cable
Charger Adapter
Charger Adapter Outlet
www.hyundaipowerproducts.co.uk
22