Advertisement
The Ethernet port on the rear panel of the EIS Box is a receptacle for an
RJ-45 ethernet cable. Use a standard ethernet cable with RJ-45
connector to connect this port to a computer's ethernet.
A suitable ethernet cable was included with your EIS Box. If this cable is
lost, you can replace it with a cable from your local computer retailer.
USB
The USB port on the rear panel of the EIS Box is a Type B receptacle for a
USB cable. Use a standard USB cable with a Type B USB (nearly square)
connector to connect this port to a computer's USB port.
734 Louis Drive • Warminster PA 18974 • Tel. 215 682 9330 Fax 215 682 9331 •
Tech Note Rev. 1.0 11/9/2018
Instruments, Inc.
www.gamry.com
Copyright 1990-2018 Gamry
•info@gamry.com
Advertisement
