Graco GM 3000 Instructions-Parts List Manual page 4

FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
If there is any static sparking or you feel an electric shock while using this equipment, stop spray-
ing immediately. Do not use the equipment until you identify and correct the problem.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
w
Keep the spray area free of debris. including solvent, rags, and gasoline.
Disconnect all electrical equipment in the spray area.
D
Extinguish all open flames or pilot lights in the spray area.
Do not smoke in the spray area.
b
Do not turn on or off any light switch in the spray area while operating or if fumes are present.
b
Do not operate a gasoline engine in the spray area.
Ground the sprayer to a true earth ground with the ground wire and clamp (supplied).
b
Use only electrically conductive~ hoses.
MOVING PARTS HAZARD
vloving parts can pinch or amputate your fingers.
1
Keep clear of all moving parts when starling or operating the sprayer.
1
Before servicing the equipment, follow the Pressure Relief Procedure on page 12 to prevent the
equipment from starling unexpectedlv.
NOTE: This is an example of the DANGER label on your sprayer. This label is available in other languages, free of
charge. See page 42 to order.
FIRE AND
EXPLOSION
HAZARD
I
SKIN INJECTION
HAZARD
Spray painting, flushing
or
cleaning equipment with flammable
spray or leaks
-
especially hose leaks. liquids
in
conflned areas can result in fire or explosion.
Liquids can be injected Into the body by high pressure airless
or turning light switches
on
and
off.
case
of
accidental skin
inlection,
seak
immediate
cigarettes, arcs from connecting or disconnecting power cords
Never spray without a
tip
guard. drop cloths. open flames such
as
pilot lights. hot objects such as
triggering
of
gun by always setting safely latch when notsPraYing.
Avoid
ail
Ignition sources such
as
static electricity from plastic
body.
Drain
all
pressure before removing parts.Avoid accidental
equipment, hoses, containers and objects being sprayed.
Keep body clear
of
the nozzle. Never stop leaks with any part
of
the
Use
outdoors or
in
extremely well ventilated areas. Ground
~~~
to
follow this warning Can result
in
death or serious IniuV.
Failure to follow this warning
can
result
in
amputation or serious
"Surgical Treatment".
Injury.
READ AND UNDERSTAND ALL LABELS AND INSTRUCTION MANUALS BEFORE USE
4
308-620