LENCO Classic Phono TCD-2571 User Manual page 9

16. ENTER/EQ BUTTON
17. MENU BUTTON
18. INFO BUTTON to show information in DAB/FM/CD.
19. PRESET BUTTON to open the favorite list and recall a station.
20. TIMER BUTTON: sleep timer
Batteries for Remote Control
The infrared remote control requires 2xAAA Batteries (excluded)
A) Remove the battery compartment cover
B) Insert 2xAAA batteries according to the markings inside the compartment.
C) Close the compartment.
POWER SUPPLY
This unit operates from a main supply of 100-250V~ 50Hz/60Hz. Connect the AC power cord to
the AC household main outlet. Ensure that the voltage is as indicated on the rating plate on the
rear of the unit.
Connect the unit to the power supply. Switch ON/OFF SWITCH (30) to ON position to turn the
unit ON. Switch ON/OFF SWITCH (30) to OFF position to switch the unit OFF.
This unit has two working modes:
STANDBY MODE: The display shows the current time and the speakers and backlight are off.
PLAYBACK MODE: The blue backlight is on and you can listen to music.
When no sound is produced, the unit will switch to STANDBY MODE automatically after
15 minutes.
To switch between PLAYBACK MODE and STANDBY MODE,. Push the volume/power knob once is
ON, push the Volume/Power knob again is OFF
SLEEP SETTING
1. This function enables you to go to sleep listening to the Radio.
2. While listening to music, press and hold TIMER (20 on remote) and press TIMER again to select
between OFF/15/30/45/60/90.
The radio will turn off automatically after the selected sleep timer.
SYSTEM SETTINGS
In all modes, press MENU button (21) (17 on remote) and select SYSTEM:
⚫
Alarm: select this option to set the alarm.
⚫
Time: select this option to set the date and time.
9