LENCO Classic Phono TCD-2571 User Manual page 16

ENCODING FROM CASSETTE
Plug USB Disk into USB socket. During TAPE playing mode, press the REC/DEL button (17) (3 on
remote) twice to starting recording and "REC" will flash on the display. Press STOP button (14)
(6 on remote) to stop recording.
ENCODING FROM PHONO
Plug USB Disk into USB socket. During PHONO playing mode, moving the tone arm over the
desired place on the record and lower it on the record, press the REC/DEL button (17) (3 on
remote) twice to starting recording and "REC" will flash on the display. Press STOP button (14)
(6 on remote) to stop recording.
ENCODING FROM BLUETOOTH
Plug USB Disk into USB socket. During BLUETOOTH playing mode, press the REC/DEL button (17)
(3 on remote) twice to starting recording your desired music and "REC" will flash on the display.
Press STOP button (14) (6 on remote) to stop recording.
ENCODING FROM AUX
Plug USB Disk into USB socket. During AUX playing mode, to switch the external signal source to
playback and press the REC/DEL button (17) (3 on remote) twice to starting recording, "REC" will
flash on display. Press STOP button (14) (6 on remote) to stop recording.
PLAYBACK FROM USB
1. Insert the USB device's plug into the USB socket.
2. Press function button (10) (5 on remote) repeatedly to select USB mode.
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB device.
DELETE USB
1. During playback, press and hold REC/DEL (17) (4 on remote). "DEL" will be shown on the
display.
2. Press SKIP -/+ (16/15) (12/13 on remote) repeatedly to select between ONE/FOLDER/ALL.
3. Press REC/DEL (17) (4 on remote) again to confirm.
EQ OPERATION
During playing mode, press the ENTER/EQ BUTTON (16 on remote) to choose from different
sound effect among FLAT/POP/CLASSIC/ROCK/JAZZ/BASS.
SPECIFICATIONS
AC: 100-250v ~ 50Hz/60HZ
16