Table of Contents
Advertisement
portion of the system.
Plumbing installation must adhere to a local code and Uniform Plumbing Code (UPC), and plumbing connections and drains
must adhere to local standards and facility codes.
•
Do not remove any Caution, Warning, or any other descriptive labels from the RO system.
Do not operate this device in an explosive environment or in the presence of fl ammable materials.
•
•
Movement or vibrations during shipment may cause connections to loosen. Check all connections before
starting up a unit.
•
Do not operate this unit in an environment where water temperatures may be below 40°F or above 80° F.
•
This equipment is intended for installation in ordinary locations, by the National Electrical Code, ANSI/NFPA 70,
where the ambient temperature does not exceed 104°F maximum.
innovateIT Car Wash Equipment LLC does not accept liability for accidents or damages due to negligence or disregard for
the instructions in this manual. Also, the Company does not accept liability for damages due to improper use of the equipment.
This instruction manual should always be kept in a safe and easily accessible place near the equipment's site of installation
and operation, and be available for the operator at the user site at any time.
If the manual is damaged, lost, or misplaced, you should mmediately request a new copy from innovateIT Car Wash
Equipment LLC.
Introduction
|
5
Advertisement
Table of Contents
