Advertisement
DEFINITIONS FOR ILLUMINATED LCD INDICATORS
1.
ONLINE: The UPS is supplying utility power to
connected equipment.
2.
ENERGY-SAVING: The UPS in energy-saving bypass
mode. See "CyberPower GreenPower UPS™
Technology" section for more information.
3.
AVR (Automatic Voltage Regulation): This icon
appears whenever your UPS is automatically
correcting low AC line voltage without using battery
power. This is a normal, automatic operation of your
UPS, and no action is required on your part.
4.
ON BATT.: During a severe brownout or blackout, this
icon appears and an alarm sounds (two short beeps
followed by a pause) to indicate the UPS is operating
from its internal batteries. During a prolonged
brownout or blackout, the alarm will beep rapidly
every 1/2 second to indicate the UPS's batteries are nearly out of power. You should save files and turn
off your equipment immediately or allow the software to shut the system down.
5.
BATTERY CAPACITY: This meter displays the approximate charge level (in 20% increments) of the
UPS's internal battery. During a blackout or severe brownout, the UPS switches to battery power, and
the charge level decreases.
6.
REPLACE BATTERY: This icon appears when the batteries are not connected well or the batteries were
worn out.
7.
FAULT: This icon appears if there is a problem with the UPS. Press the POWER button to turn the UPS
off.
‐
E02: Charger Fault – No Charge (Contact CyberPower Systems for support.)
‐
E11: Battery Overvoltage (Contact CyberPower Systems for support.)
‐
E21: Output Short (Check the status of equipment connected to the UPS and then turn on the
UPS again.)
‐
E22: Overload (Unplug at least one piece of equipment from battery outlets and turn the UPS on
again.)
8.
OVERLOAD: This icon appears and an alarm sounds to indicate the battery-supplied outlets are
overloaded. To clear the overload, unplug one piece of equipment from the battery-supplied outlets at a
time until the icon turns off and the alarm stops.
9.
CURRENT LOAD: This meter displays the approximate output load level (in 20% increments) of the UPS
battery outlets.
10.
SCHEDULE: Users can setup the schedule to turn on and shut down the computer and UPS through
PowerPanel Business software. The LCD display will show how much time is left before the UPS will turn
back on or shut down.
11.
MUTE: This icon appears whenever the UPS is in silent mode. However, when there is a problem with the
UPS, the alarm will still beep even in silent mode.
12.
INPUT METER: This meter measures the AC voltage that the UPS system is receiving from the utility
wall outlet. The INPUT voltage meter can be used as a diagnostic tool to identify poor-quality input
power.
13.
OUTPUT METER: This meter measure, in real time, the AC voltage that the UPS system is providing to
the computer, such as normal AC line mode, AVR mode, and battery backup mode. (Note: The OUTPUT
meter shows the status of the battery backup outlets in terms of load, frequency, and voltage.)
14.
EVENT: This meter records the number of power outages.
15.
ESTIMATED RUNTIME: This displays the runtime estimate of the UPS with current battery capacity and
load.
16.
SENSITIVITY SETUP: This meter is also used to setup the UPS sensitivity when you are in the
programming mode. If the connected equipment can tolerate more power events (example: unstable
power often associated with stormy weather), select Low Sensitivity and the UPS will go to Battery
Mode less often. If the connected equipment is more sensitive to power events, select High Sensitivity
and the UPS will go to Battery Mode more often.
For more information about functions setup, please refer to the Function Setup Guide.
TECHNICAL SPECIFICATIONS
Model
CP1200EIPFCLCD
Capacity
1200VA/ 720W
Nominal Input Voltage
Frequency Range
AVR Function
On Battery Output Voltage
*Under a test load of less than 60%. When the load exceeds 60%, the output voltage
On Battery Output Frequency
Lightning / Surge Protection
Network Protection
Operating Temperature
Operating Relative Humidity
Operating Elevation
Storage Temperature
Storage Relative Humidity
Storage Elevation
Maximum Dimensions(WxHxD)
Weight
Battery
Typical Recharge Time
User Replaceable
LED Indicators
Audible Alarms
Software (Free Download)
SNMP / HTTP Remote Monitoring
Certifications
4
5
1
2
3
11
10
9
12
13
14
15
CP1350EPFCLCD
CP1600EPFCLCD
1350VA/ 810W
1600VA/ 1000W
220-240Vac
50/60Hz ± 3 Hz (Auto Sensing)
Yes
230Vac ± 5%
range may exceed 5%.
50/60Hz ± 1%
405J
RJ45
0°C – 40°C
0% – 95% Non-condensing
0 – 3,000 meters
-15°C – 45°C
0% – 95% Non-condensing
0 – 15,000 meters
100 x 280 x 355 mm
10 kg
Sealed Maintenance Free Lead Acid Battery
8 hours
* Recover to 90% after full load discharge.
Yes
Power On
On Battery, Low Battery, Overload, Fault
PowerPanel Personal/Business
Yes – with optional RMCARD205
CE
6
Problem
Circuit breaker button
is projecting from the
7
back of the unit.
8
The UPS does not
perform expected
runtime.
16
The UPS will not turn
on.
PowerPanel
Personal/Business
software is inactive (all
icons are gray).
The USB charging
ports are not providing
power to the
connected devices.
CYBERPOWER GREENPOWER UPS™ TECHNOLOGY
Advanced Energy-Saving Design
The GreenPower UPS™ has a high-efficiency charger, which makes it the most
energy-efficient UPS in its class. The advanced high-frequency charging system
significantly improves charging efficiency and conserves energy. As a result of this
advanced design, the GreenPower UPS™ uses less energy compared to competitive
models. The GreenPower UPS™ is manufactured in accordance with the Restriction on
Hazardous Substances (RoHS) directive making it one of the most
environmentally-friendly UPS on the market today.
For more information, please contact:
Europe, Northern Ireland
Cyber Power Systems B.V.
Flight Forum 3545, 5657DW Eindhoven, The Netherlands
Tel: +31 40 2348170
Fax: +31 40 2340314
Email: eu.service@cyberpower.com
Austria, Germany, Switzerland
Cyber Power Systems GmbH
Edisonstrasse 16, 85716 Unterschleissheim, Germany
Telefon: +49 89 1 222 166 0
Fax: +49 89 1 222 166 29
Email: de.service@cyberpower.com
Taiwan, United Kingdom
Cyber Power Systems, Inc.
11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan
Tel: +886 2 8792 9510
Fax: +886 2 8792 9621
Email: tw.service@cyberpower.com, uk.service@cyberpower.com
11 kg
For other regions, please visit our website for local contact information.
Copyright © 2023 Cyber Power Systems, Inc. All rights reserved.
CyberPower and the CyberPower logo are trademarks of Cyber Power Systems, Inc., and/or affiliates, which
are registered in many countries and regions. All other trademarks are the property of their respective
owners.
TROUBLESHOOTING
Possible Cause
Circuit breaker has tripped
Turn the UPS off and unplug at least one
due to an overload.
piece of equipment. Wait 10 seconds, reset
the circuit breaker by depressing the button,
and then turn the UPS on.
Battery not fully charged.
Recharge the battery by leaving the UPS
plugged in.
Battery is worn out.
Contact CyberPower about replacement
batteries.
The on/off switch is designed
Turn the UPS off. Wait 10 seconds and then
to prevent damage from
turn the UPS on.
rapidly turning it off and on.
The battery is worn out.
Contact CyberPower about replacement
batteries.
Mechanical problem.
Contact CyberPower.
The USB is not connected.
Connect the USB cable to the UPS unit and
an open USB port on the computer. You
must use the cable that came with the unit.
The USB is connected to the
Check the computer for an additional USB.
wrong port.
Move the cable to this port.
The unit is not providing
Shutdown your computer and turn the UPS
battery power.
off. Wait 10 seconds and turn the UPS back
on. This should reset the unit.
The USB power port has Over
Turn the UPS off and unplug at least one
Current Protection design.
piece of device connected to the USB
When the total current of
charging port and then turn the UPS on.
connected devices is over
specification, the USB
charging ports will stop
providing power to the
connected devices.
DISPOSAL
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to
contribute to sustainable production and consumption by contributing to the
efficient use of resources and the retrieval of secondary raw materials through
re-use, recycling and other forms of recovery. The symbol on this product and/or
its packaging indicates that the product must be disposed of separately from
ordinary household wastes at its end of life. Contact your related WEEE
management authority, local office, or your household waste disposal service
about information on the recycling drop off site.
BATTERY DISPOSAL
This product contains non-spillable lead acid batteries. The used batteries are
considered hazardous waste and must be disposed through recycling. Do not
dispose of used batteries with your ordinary household wastes. Dispose of the
batteries according to the local regulations.
Note: Most retailers that sell lead-acid batteries collect used batteries for recycling,
as required by the local regulations.
Solution
Advertisement
