Park Preferences; Returning The Robotic Mower To The Charging Station; Returning The Robotic Mower To The Charging Station And Restarting Operation At The Scheduled Time; Returning The Robotic Mower To The Charging Station And Restarting Operation At The Preset Schedule - Makita RM350D Instruction Manual

NOTICE: Spiral cutting cannot be started on a slope with a
gradient that exceeds 16°.
1. Turn off its power switch and place the Robotic Mower in the
location to start spiral cutting. Then turn on the power switch.
2. Press the button on the control panel.
The sub menu appears.
3.
Select [Mowing - With spiral cutting].
The option menu appears.
4. Select the desired option.
Option Details
Auto mowing Executes spiral cutting in the main area, and when
complete, continues mowing by automatic opera-
tion and charging.
Mowing without Executes spiral cutting, and when complete, con-
charging tinues auto mowing within the specified period and
without automatic charging.
Press the key, and the message [Close the display cover to start
mowing.] appears.
5.
Close the display cover.
The Robotic Mower starts mowing.

Park Preferences

NOTE: It is recommended to set the active search period for the
guide signal to "0" (zero), if you do not install guide wires in your
work area. It helps the Robotic Mower return to the charging station
quickly. For details, refer to "Setting the active search period for the
guide signal" (Page 23).

Returning the Robotic Mower to the charging station

[Top menu] > [Park] > [Stay at charging station]
The mowing work is stopped and the Robotic Mower is returned to
the charging station.
1. Press the button on the control panel.
The sub menu appears.
► Fig.23
2.
Select [Stay at charging station].
Press the key, and the message [Close the display cover to return
to the charging station.] appears.
3. Close the display cover.
The Robotic Mower returns to the charging station.
Returning the Robotic Mower to the charging station
and restarting operation at the scheduled time
[Top menu] > [Park] > [Schedule restart time]
The Robotic Mower is returned to the charging station, and then oper-
ation is restarted after the specified time.
1. Press the button on the control panel.
The sub menu appears.
2.
Select [Schedule restart time].
The entry screen appears.
3. Use the keypad and enter the desired time.
► Fig.24
NOTE: You can enter a time to restart of 0 to 99 hours. The initial
setting is 3 hours.
4.
Press the key to verify the entry.
The message [Close the display cover to return to the charging sta-
tion.] appears.
5. Close the display cover.
The Robotic Mower returns to the charging station.
Returning the Robotic Mower to the charging station
and restarting operation at the preset schedule
[Top menu] > [Park] > [Restart on schedule]
The Robotic Mower is returned to the charging station, and then oper-
ation is restarted at the preset mowing schedule. The Robotic Mower
continues to stand by after returning to the charging station, and then
automatically departs from the station to meet the next preset mowing
schedule.
NOTE: If the Robotic Mower is not sufficiently charged, it will not
start mowing even if the preset schedule approaches. Mowing will
restart once charging is complete.
NOTE: The schedule displayed on the screen cannot be created,
changed, or deleted from this menu. To adjust the schedule, select
[Schedule] in the [Mowing preferences] menu and redo the settings.
1.
Press the button on the control panel.
The sub menu appears. The mowing schedule is displayed next
to [Restart on schedule]. The displayed date and time are the next
planned restart schedule after the Robotic Mower has returned to the
charging station.
2. Select [Restart on schedule].
Confirm the displayed start schedule and continue with the setting.
► Fig.25: 1. Next planned restart schedule
Press the key, and the message [Close the display cover to return
to the charging station.] appears.
3. Close the display cover.
The Robotic Mower returns to the charging station.

Mowing Preferences

Changing and registering the mowing area

[Top menu] > [Main menu] > [Mowing preferences] > [Mowing
area]
This is used to change the mowing area size registered when the
Robotic Mower was started up for the first time, or to register the size
of a new mowing area. The Robotic Mower figures out the optimal
mowing process and efficiently mows the lawn based on the mowing
area information set here.
NOTICE: Set an appropriate mowing area. If the set value devi-
ates greatly from the actual area, there may be unmowed places,
etc.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
► Fig.26
The sub menu appears.
3.
Select [Mowing area].
► Fig.27
4. Use the keypad and select the size range of your mowing area.
► Fig.28: 1. Triangular arrow marks
NOTE: When triangular arrow marks are displayed next to the
option, press the /
When the desired option appears, press the
selection.
5. Follow the message displayed on the screen and complete the
setting.
When the message [Saved successfully.] appears, press the
21 ENGLISH
/ / keys to switch the option display.
key to verify the
key.