Whirlpool GZ9736XSS Installation Instructions And Use And Care Manual page 11

Non-vented (recirculating) Installation - Style 2
IMPORTANT: For this installation, you will need Charcoal Filter
Kit Part Number 8212566.
1. To determine the length of flexible duct that is necessary
when the deflector is positioned near the ceiling, measure the
distance from the adapter to the deflector.
A
B
A. Deflector
B. Adapter
C. Distance from adapter to deflector
2. Attach the flexible metal duct to the 5" (12.7 cm) adapter.
Seal connection with vent clamp.
B
C
A. 5" (12.7 cm) flexible metal duct
B. Vent clamp location
C. Blower collar
3. Assemble the deflector to the flexible metal duct.
4. Attach the duct to the deflector's connector with vent clamps.
5. Slide the lower decorative flue into the recessed area of the
range hood top.
B
A. Lower decorative flue
B. Recessed area
C
A
A
6. Slide the upper decorative flue down inside the lower
decorative flue.
NOTE: The upper decorative flue vents must be visible.
7. Secure the deflector to the upper decorative flue with 4 flat
head screws (included in charcoal filter kit).
A. Deflector
B. Four flat head screws
C. Upper decorative flue
8. Plug into a grounded 3 prong outlet.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
9. Raise the upper decorative flue until the holes align with the
holes in the flue mounting bracket.
10. Mount the decorative flue to the flue mounting bracket with
two 3.9 x 9.5 mm mounting screws.
B
A. Flue mounting bracket
B. 3.9 x 9.5 mm mounting screws
A
B
C
A
11