INSTALLATION INSTRUCTIONS
77980T-4
77980T-4A
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Inspect the supply tubing for damage. Replace as necessary.
3. Observe local plumbing codes.
4. These products should match with wall-mount single control handle lavatory faucet valve 28138T.
5. Install the valve 28138T before installing these handles.
HANDLE OPERATION
Lift the handle gently, turn clockwise for hot water, counter-clockwise for cold water.
ROUGH-IN DIMENSIONS
Ø60
Ø42
8
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
1293309-2A-A
Wall-Mount Single Control Lavatory Handle-Lever
Wall-Mount Single Control Lavatory Handle-Pin
6
77980T-4
Ø5
17
COMPONENTS
Ø60
Ø42
6
77980T-4A
8
1