Installation; Mounting The Microwave Oven - Gorenje BM251S4XG Manual

MOUNTING THE MICROWAVE OVEN

INSTALLATION

16
1. Make sure all the packing materials are removed from
the inside of the door.
2. Inspect the oven after unpacking for any visual
damage such as:
– Misaligned Door
– Damaged Door
– Dents or Holes in Door Window and Screen
– Dents in Cavity
If any of the above are visible, DO NOT use the oven.
3. This Microwave Oven weighs 17 kg kg and must be
placed on a horizontal surface strong enough to
support this weight.
4. The oven must be placed away from high temperature
and steam.
5. DO NOT place anything on top of the oven.
6. DO NOT remove the turn -table drive shaft.
7. As with any appliance, close supervision is necessary
when used by children.
8. Make sure that the AC outlet is easily accessible
so that the plug can be removed quickly in an
emergency. Otherwise, it should be possible to
disconnect the device using a switch from the circuit.
In this case, the existing provisions of the electrical
safety standards are considered.
The product has to be correctly installed on earthed
socket with a single-phase AC (230 V/50 Hz).
WARNING! THIS APPLIANCE MUST BE EARTHED!
9. This oven requires 1.5 KVA for its input consultation
with service engineer is suggested when installing the
oven.
CAUTION: This oven is protected internally by a 250 V,
10 Amp Fuse.