F&F DRM-05 Manual

DRM-05
Plafond with a microwave
motion sensor
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
Plafond with a microwave motion sensor is used for automatic
and temporary switching on of lighting if a person or other ob-
ject appears in places such as hallways, courtyards, driveways,
garages, etc.
The sensor can detect movement through wooden, plasterbo-
ard, glass and plastic panels.
Functioning
The sensor emits and receives 5.8 GHz high-frequency elec-
tromagnetic waves. The high-frequency waves penetrate the
lampshade of the plafond and allow motion detection. The
sensor detects changes in the reflection of the waves caused
by the movement of an object within the detection area. The
sensor detects the movement of an object to and from the sen-
sor. Movement within the detection area causes the lighting
to switch on automatically. From the moment of switching on,
continuous movement causes permanent switching on of this
lighting.
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -