F&F DR-06W Instruction Manual

DR-06W
Motion sensor (PIR),
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The motion sensor is used for automatic and temporary swit-
ching on of lighting if a person or other object appears in places
such as hallways, courtyards, driveways, garages, etc.
Functioning
The sensor detects the infrared radiation sources. It analyzes
the parameters such as the size of the object, the amount of
heat emitted and the speed of movement between sectors of
detection. Movement in the detection area will automatical-
ly switch on the lighting. From this moment the light will stay
on, as long as the sensor detects continuous movement. Only if
there is no movement in the detection area triggers the lighting
support time. Another movement in the detection area and its
subsequent disappearance in the course of time measurement
starts the support time from the beginning. The specific of ope-
ration allows using the DR-06 as a presence sensor. The motion
sensor is equipped with a twilight sensor to prevent switching
on the lighting during the day. The brightness sensor activation
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
white
- 1 -