Table of Contents
Advertisement
Section 4: Component Removal
Control Box Top Cover Removal
NOTE
1. Cut off power to the hood unit.
2. The vent grill cover and filter assembly needs to
be removed before the control box top cover
can be removed
1． Remove two screws on the control box top cover
2． Pull the control box top cover down and
forward removing the cover.
4-5
3． The removal of control box top cover is
done.
NOTE
1． After reinstalling the top cover (before tightening
screws) check that all wires are inside control box
top cover. No wires should be pinched between
the top cover and range hood housing.
Advertisement
Table of Contents
