tracted before the earth wire if it 1. SAFETY INFORMATION comes loose. • The manufacturer cannot be For your own safety and held responsible for any dam- correct operation of the age resulting from incorrect or appliance, please read inadequate installation. this manual carefully be- fore installation and oper- •...
Page 3
prevent any exhaust back- • Cleaning and maintenance flow. When the cooking appli- must not be carried out by ance is used together with children, unless they are su- other appliances using non- pervised by an adult. electrical power sources, the •...
Page 4
graph on Cleaning and main- • The appliance is not designed tenance. to be started using an external timer or a separate remote- • Always guarantee adequate controlled system. ventilation of the room when the appliance is used in con- WARNING: Danger of fire: do junction with other appliances not place objects on the cooking...
2. USE • The suction hood has been designed solely to eliminate cooking fumes dur- ing domestic use. • Never use the appliance for purposes Regeneration procedure: other than those for which it has been • Wash in the dishwasher at a MAX designed.
• Remove encrusted dirt, for example hesives can cause deformation and milk that has overflowed during boil- detachment. ing, using a scraper pad suitable for • The kitchen unit must have sufficient vitreous ceramic, while the hob is still space to allow for electrical connec- hot.
• Check that the domestic power sup- • Place the pan on the hob before you ply characteristics (voltage, max- switch it on. imum power and current) are compat- • Put smaller pans on the smaller cook- ible with those of the appliance. ing areas.
The residual heat indicator is a safety if touched with bare hands. The digit for feature, indicating that the surface of the the corresponding cooking area indic- cooking area is still at a temperature of ates 50°C or above, which may cause burns 8.
Page 9
Value on KW Notes swipe key- board 7.4 Standard initial setting Once the correct value has been entered, confirm by pressing and hold- and . 10. HOB FUNCTIONS Lock It is possible to lock the hob functions during use, e.g. to clean the hob. To enable/disable: press Child lock This function prevents accidental use of the appliance.
Pause function This function allows you to pause/restart any active function on the hob, by reducing the power available in the cooking zone and resetting all the functions. During the pause, all the digits indicate to inform the user that: - No energy is produced in any of the cooking areas.
Quick heating Boiling water 12. SUCTION HOOD FUNCTIONS The controls for the cooking areas, suction hood and timer can be activated by pressing on the reference Digit. Suction power selection. Increase/decrease in suction speed (power). Enabling/disabling of an automatic function (automatic mode is enabled by de- fault).
Page 12
The Power management function is first Do not use empty or thin-based pots/ activated when the presence of a pan is pans on the hob as it will be unable to detected on the cooking element. detect the temperature or turn off auto- matically if the temperature is too high, Example: thus damaging the pan or the hob sur-...
For the electronic system to operate Rhythmic sounds like a clock ticking correctly, the temperature of the cooker This noise only occurs when at least hob must be regulated. To do this, the three cooking areas are operating, and hob is equipped with a cooling fan that is it disappears or decreases when some activated to reduce and regulate the of them are turned off.
2100 W; Power Boost: 210 x 190 1,2,3,4 3000 W Type: 4300 Flexible cooking 3000 W; Power Boost: 210 x 380 Model: FMA 8391R HI area 3700 W 1+2, 3+4 Parameter Value Dimensions Please see the identification plate af- (mm) fixed to the bottom of the product.
Page 15
Franke UK Limited West Park, MIOC Styal Road Manchester M22 5WB Phone +44 (0)161 436 6280 + + + 4 4 0 0 0 ) 0) ) ) 1 1 6 16 Email ks-info.gb@franke.com www.franke.com...
Need help?
Do you have a question about the FMA 8391R HI and is the answer not in the manual?
Questions and answers