16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
and, at the same time,
2.
turn the programme selector to po-
sition 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 36
To change the value, press
4.
To save the changes, switch off
5.
the appliance.
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on siemens-home.bsh-
group.com .
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum Clean programme
▶
without laundry and using washing
powder.
17.2 Cleaning the detergent
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product or if the
detergent drawer is dirty, clean the
.
detergent dispenser.
ATTENTION!
The pump unit contains electrical
components. Electrical components
may be damaged if they come into
contact with liquids.
Do not clean the pump unit in the
▶
dishwasher and do not immerse it
in water.
Protect the electrical connection
▶
on the rear against water, deter-
gent and fabric softener residue.
Switch off the appliance.
1.
→ "Switching off the appliance",
Page 32
Pull out the detergent drawer.
2.
Cleaning and servicing en
drawer
37