Table of Contents
Advertisement
mp Using the Directory
Changing an Item in the Directory
I
O N
iN
Rotate
until the desired item is
displayed.
e You can also find the item by searching by
the initial (p. 44).
Press
|FUNCTION/EDIT).
e If you do not need to change the name, go
to step 4.
Edit the name by using the dialing buttons,
(JOG DIAL), (+) (<-) or Œ) (+) (p. 42) up to
16 characters.
l
Press (SEND/SET) (Next key).
e If you do not need to change the number,
go to step 6.
Enter the new number up to 16 digits.
e You can use
[JOG DIAL} to move the cursor
for corrections.
e The digit at the cursor is erased by pressing
HOLD/CLEAR).
Press [SEND/SET) (Next key).
a) If you do not want to select private ring,
press (#) (NO key).
b) If you want to select private ring, press
(YES key).
e A long beep sounds and the changed item
is saved.
e The display will return to step 1. You can
continue editing another item.
e To return to the stand-by mode, press
or wait for 60 seconds.
Jane
123-4567
-Directory
list-
Enter
name
>
Jane
JOG=¢73
SET=Next
Enter
name_>
Jane
Walkey
JoG=¢7
SET=Next
Enter
phone
no.>
11234567
JOG=td
SET=Next
Enter
phone
no.>
0981234567
TOG=C4
SET=Next
Private
ring
?
x=Yes
#=No.
Jane
Walker
098-123-4567
KOK OK
Saved
KOK Ok
Jane
Walker
098-123-4567
Private
KOK OK
Saved
KKK
6 e You can exit the programming mode any time by pressing (EXIT).
Advertisement
Table of Contents
