Ledvance Area Light 6A Manual

Ledvance Area Light 6A Manual

Performance class dual selectable area flood

Advertisement

Available languages

Available languages

Quick Links

LEDVANCE Luminaries
Performance Class Dual Selectable Area Flood
Area Light 6A
The LEDVANCE Performance Class
Dual Selectable Area Flood 6A
luminaires come with a NEMA 7-pin
receptacle and optional screw-in sensors.
They are the ideal solution for parking
lots, building facades, and general area
lighting.
For warranty coverage, please register at www.ledvanceUS.com
Please Read All Instructions Before Attempting Installation
• TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE ALL
INSTALLATION SERVICES.
• TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OR
SERVICING.
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC) AND ALL
APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC CODES AND SAFETY STANDARDS.
• USE ONLY UL (OR OTHER NTRL) APPROVED WIRE FOR INPUT/OUTPUT CONNECTIONS. MINIMUM SIZE 18 AWG OR 14
AWG FOR CONTINUOUS RUNS.
• DO NOT INSTALL IN A HAZARDOUS ATMOSPHERE, EXCEPT WHERE THE AMBIENT TEMPERATURE DOES NOT EXCEED
THE RATED OPERATING TEMPERATURE OF THE FIXTURE.
• USE CAUTION WHEN HANDLING THIS PRODUCT DURING OR AFTER OPERATION AS IT MAY BECOME HOT AND CAUSE
BURNS. DISCONNECT PRODUCT AND ALLOW COOLING PRIOR TO SERVICING.
• ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE SERIOUS
PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION.
• TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE PROPERLY
GROUNDED.
• CAUTION - RISK OF FIRE
• THIS LUMINAIRE IS DESIGNED TO OPERATE IN AMBIENT TEMPERATURES RANGING FROM -40°F TO +122°F (-40°C TO
+50°C).
4197743
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Area Light 6A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ledvance Area Light 6A

  • Page 1 LEDVANCE Luminaries Performance Class Dual Selectable Area Flood Area Light 6A The LEDVANCE Performance Class Dual Selectable Area Flood 6A luminaires come with a NEMA 7-pin receptacle and optional screw-in sensors. They are the ideal solution for parking lots, building facades, and general area lighting.
  • Page 2: Safety Precautions

    Safety Precautions: IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE. GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. Wattage and CCT Selection Switch 1.
  • Page 3: Universal Mounting Bracket

    Universal Mounting Bracket: *Each fixture comes with a universal mounting bracket that includes slip fitter, square and round pole mount. Pole Drill Pattern: 4197743...
  • Page 4 Installation: Slip fitter Mount light AM Bracket Adjusting Bolt Locking Bolt Support Support 1. Remove any spare parts from the bracket. 4. Place the bracket into the pole and lock the four bolts. 2. Loosen the four bolts on the bracket Note: Adjustable angle range is 0-90°...
  • Page 5 5. For round pole mounting, use the adapting plate. Note: the fixture can be adjusted 0-90° Installation: Motion Sensor Installation: Photocell Sensor Shorting cap Shorting cap Photocell 1/2 plug Socket When photocell function is required, the 1. Unscrew the 1/2 plug photocell should be installed on the back of 2.
  • Page 6: Wiring Diagram

    Wiring Diagram Black/Brown:ACL Green/Yellow As for the wire color White/Blue: ACN Dim+ of DIM+ and DIM-,pls Dim- check the lamp label. 4197743...
  • Page 7 Projecteur pour grande surface 6A Les projecteurs pour grande surface à double sélection de classe performance de LEDVANCE sont dotés d'une prise NEMA à 7 fentes et de détecteurs vissables en option. Ils constituent la solution idéale pour les stationnements, les façades de bâtiments et l'éclairage de grande surface...
  • Page 8: Mesures De Sécurité

    Mesures de sécurité : IMPORTANT : VEUILLEZ LIRE ATTENTIVEMENT LES DIRECTIVES D’INSTALLATION AVANT L’INSTALLATION DE CE LUMINAIRE. GARDER CES DIRECTIVES POUR RÉFÉRENCE FUTURE. GÉNÉRAL : Lors de la réception de l'appareil, vérifiez soigneusement qu'il n'y a pas de dommages causés durant le transport et si des dommages sont constatés aviser le transporteur.
  • Page 9 Support de montage universel : *Chaque luminaire est muni d'un support de montage universel qui comprend un raccord lisse, un support carré et rond pour le montage sur mât. Gabarit de perçage des mâts : 4197743...
  • Page 10 Installation : montage sur raccord lisse light Luminaire AM Bracket Support AM Adjusting Bolt Écrou ajustable Locking Bolt Écrou de verrouillage Support Support Support Support 1. Retirer toutes les pièces de rechange du support 4. Placer le support dans le mât et rattacher les quatre 2.
  • Page 11 Support A et D Luminaire Plaque de raccord Poteau rond 5. Pour un montage sur mât rond, utiliser la plaque d'adaptation. Note : le luminaire peut être ajusté de 0 à 90°. Installation : Installation : détecteur de mouvement cellule photoélectrique Détecteur de Sensor Shorting cap...
  • Page 12: Schéma De Câblage

    Schéma de câblage Noir/brun : ACL Black/Brown:ACL Green/Yellow Vert/jaune As for the wire color En ce qui a trait à la couleur des Blanc/bleu : ACN White/Blue: ACN Dim+ of DIM+ and DIM-,pls fils GRAD.+ et GRAD.-, veuillez Grad. + Dim- check the lamp label.

Table of Contents