Table of Contents
Advertisement
en-us_main.book.book Page 19 Wednesday, July 12, 2023 4:56 PM
4
Pull the front of the dust bag
the dust bag.
• As the dust bag is pulled out, the top
opening is closed.
5
Throw away the dust bag.
6
Prepare a new dust bag.
• To avoid odors, do not reuse the dust bags.
7
Place the end of the dust bag on the rail inside
the product.
• Make sure that the dust bag is level, with
both sides sitting properly on the rails.
• Pull the top of the bag away from the rails if
needed to smoothly insert the bag.
• If the bag is not inserted properly, dust will
escape from the top of the bag.
8
Slide the dust bag in along the rails of the
product until it is completely inserted.
9
Hold the front of the dust bag
up until it clicks into place.
b
to remove
NOTE
• The dust bag door will not close without a dust
bag. Discard the dust bag and be sure to put a
new dust bag in place.
• Replace the dust bag every month to maintain
the dust emptying performance. The
replacement cycle may vary depending on the
environment, and may be especially short in
conditions with a lot of dust or pet hair.
• Replace the dust bag if it smells, even if it is not
full.
• The motor protection filter will eventually need
to be replaced. Contact an LG Electronics
customer service center.
Cleaning the Filters
Clean the motor protection filter and the exhaust
filter every 3 months or sooner if the dust
emptying function seems weaker.
• Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
• Do not use the appliance without the exhaust
filter and the motor protection filter installed.
Doing so could result in product damage.
1
b
and push it
2
MAINTENANCE
CAUTION
Open the left and right component storage
doors.
Hold the product with one hand and open the
dust bag door with the other hand.
19
Advertisement
Table of Contents
